• 
• 
• 
• 
• 
• 

cs series cone crusher materials by the working surface between the movable cone and fixed cone. working principle of cs series cone crusherThe movable cone is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole; consequently the output size is determined.

Standard CS Series spring cone crusher technique paramete:
Type	Dia. of cone	Cavity	Discharge setting	Capacity	Counter shaft	Power	Weight	Overall dimension
	mm (inch)		mm	ton/hour	r/min	kw	ton	mm
CSB75	900 (3')	fine	9-22	45-91	580	75	15	2821 × 1880 × 2164
		coarse	13-38	59-163
CSB110	1200 (4')	fine	9-31	63-188	485	110	20	2821 × 1974 × 2651
		medium	13-38	100-200
		coarse	19-51	141-308
CSB160	1295 (4 1/4')	fine	13-31	109-181	485	160	27	2800 × 2342 × 2668
		medium	16-38	132-253
		coarse	19-51	172-349
CSB240	1650 (5 1/2')	fine	16-38	181-327	485	240	55	3911 × 2870 × 3771
		medium	22-51	258-417
		coarse	25-64	299-635
CSB315	2134 (7')	fine	19-38	381-726	435	315	110	4613 × 3251 × 4732
		medium	25-51	608-998
		coarse	31-64	789-1270

Short head CS Series spring cone crusher technique paramete:
Type	Dia. of cone	Cavity	Discharge setting	Capacity	Counter shaft	Power	Weight	Overall dimension
	mm (inch)		mm	ton/hour	r/min	kw	ton	mm
CSD75	914 (3')	fine	3-13	27-90	580	75	15	2821 × 1880 × 2410
		coarse	3-16	27-100
CSD110	1218 (4')	fine	5-16	50-132	485	110	20	2560 × 1942 × 2928
		medium	10-16	90-145
		coarse	13-19	141-181
CSD160	1295 (4 1/4')	fine	3-16	36-163	485	160	27	2800 × 2342 × 2668
		medium	6-16	82-163
		coarse	10-25	109-227
CSD240	1676 (5 1/2')	fine	5-13	90-209	485	240	55	3917 × 2870 × 3771
		medium	6-19	136-281
		coarse	10-25	190-336
CSD315	2134 (7')	fine	5-16	190-408	435	315	110	4130 × 3251 × 4454
		medium	10-19	354-508
		coarse	13-25	454-599

Note: This specification is just reference, any changes are subject to the products.

• 

  PFW Impact crusher

• 

  portable jaw crusher

• 

  vsi5x crusher

• 

  JC jaw crusher

• 

  cs series cone crusher

• 

  vibrating feeder