• 
• 
• 
• 
• 
• 

This impact crusher crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

Type	Spec.	Feed Opening Size (mm)	Max. Feed Size (mm)	Crushing Capacity (t/h)	Weight (t)	Dimension (mm)
PFW1210Ⅲ	Φ1150 × 960	570 × 990	250	70-120	15.0	2550 × 1870 × 2100
PFW1214Ⅲ	Φ1150 × 1400	570 × 1430	250	90-170	19.0	2550 × 2310 × 2100
PFW1315Ⅲ	Φ1300 × 1500	625 × 1530	300	180-270	25.0	2960 × 2570 × 2380
PFW1318Ⅲ	Φ1300 × 1800	625 × 1830	300	220-300	30.0	2960 × 2870 × 2380

Type	Spec.	Feed Opening Size (mm)	Max. Feed Size (mm)	Crushing Capacity (t/h)	Weight (t)	Dimension (mm)
PFW1210 II	Φ1150 × 960	1100 × 1030	400	90-160	17.0	2400 × 1870 × 2550
PFW1214 II	Φ1150 × 1400	1100 × 1430	500	130-200	22.0	2400 × 2310 × 2550
PFW1315 II	Φ1300 × 1500	1200 × 1530	600	180-320	29.0	2700 × 2570 × 2800
PFW1318 II	Φ1300 × 1800	1200 × 1830	700	240-400	34.0	2700 × 2870 × 2800

Note: This specification is just reference, any changes are subject to the products.

• 

  PFW Impact crusher

• 

  portable jaw crusher

• 

  vsi5x crusher

• 

  JC jaw crusher

• 

  cs series cone crusher

• 

  vibrating feeder