Impact crusher

No-board connection;
High reduction ratio and crushing efficiency;
Crushed products with cubical shape and without tensility;
Impact plate with a special shape;
Easy maintenance and reliable.

Want to buy set ?

Model Search in this category

Parts & Spares

working principle

Impact crusher crushing materials with impact force. When materials enter, crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then materials will be shot back to the blow bar again for the third crush. Process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. Size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. Impact crusher employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

specification

Type	Spec.	Feeder Opening (mm)	Feeding Size (mm)	Crushing Capacity (t/h)	Motor Power (KW)	Weight (t)
PF-1010	Φ1000 × 1050	400 × 1080	350	50-80	55-75	12.6
PF-1210	Φ1250 × 1050	400 × 1080	350	70-120	110-132	14
PF-1214	Φ1250 × 1400	400 × 1430	350	80-160	132-160	18.6
PF-1315	Φ1320 × 1500	860 × 1520	350	160-260	180-260	24.2
PFV-1010	Φ1000 × 1050	400 × 1080	350	60-100	55-75	13.2
PFV-1210	Φ1250 × 1050	400 × 1080	350	70-150	110-132	15.2
PFV-1214	Φ1250 × 1400	400 × 1430	350	100-200	132-160	18.6
PFV-1315	Φ1320 × 1500	860 × 1520	350	150-300	180-220	24.5

Note: This specification is just reference, any changes are subject to the products.

Impact crusher

PFW Impact crusher

portable jaw crusher

vsi5x crusher

JC jaw crusher

cs series cone crusher

vibrating feeder